Parameters:
- Material: aluminum alloy
- Low voltage warning: yes
- Reverse polarity protection: yes
- Lens Type: ar-coated glass lens and 12 degree TIR bead lens
- Switch position: side
- Mode memory: yes
- Tail stand: yes
- Driver output : 12V 2.5A for GT FC40
- Flux: GT FC40 --- 2500LM
- Maximum charging current: 2A
- Battery : 1 piece 26800 6800mAh lithium battery
- Size: Head/body diameter: 40mm/33mm
- length: 140.8mm
- Product weight: 182g
Mode operation instructions:
1.click the button ——> flashlight is turned on with last brightness ——> press the button,brightness ramping up ——> release and press the button again,brightness ramping down
2.flashlight off, press the button ——> moonlight mode (0.2%) [This brightness will not be remembered]
3.flashlight on or off, 2-click the button ——> turbo 100%
4.flashlight off,3-click the button ——> strobe
5.flashlight off,4-click the button ——> tactical mode, only 100% ,4-click the button again to quit tactical mode.
6.flashlight off,5-click the button ——> voltage detection (* means "flash" , *** pause ******* means 3.7V, )
7.flashlight off,6-click the button ——> normal ramping mode switch to 4modes 1%-10%-40%-100%
8.flashlight off,10-click the button ——> Lock mode,The flashlight will flash once under any operation, which means the flashlight is locked.10-click the button again to quit lock mode,Please note that this is the only way to unlock.
The flashlight has low voltage protection and temperature control protection.